Sand Cover Strip

Hotline:0577-66087629

Introducing
Testing
Applications
Partners
Iso

Scope Of Application:

Scope To Reinforce The Gaps Left By The Joint Process Of Pre-laid Anti-adhesive WaterproofingMembrane,A Covering Reinforcement Sealing Treatment lsApplied.For Damaged Pre-laid Membrane, Repair ls Performed Followed By Sealing After Violent Piercing.

Product Features:

The Deformable Cover Strip ls Capable Of Withstanding A Certain Degree Of DeformationAnd Has AFollowing Property. It Has Extremely Flexible Characteristics And Can ConformAnd Seal Well ln lrregular Areas. It Has The Advantages Of Convenience,Quickness,Reduced Construction Period,Accurate Amount,And Reduced Waste. It Has Excellent lnitial Adhesion, Holding Power, Low-temperature Bonding,And Other Significant Features.lt Does Not Contain Any Solvents, Making It Safe And Environmentally Friendly.

Note:

In Order To Achieve The Best Results, The Surface OfThe Polymer Membrane Should BeCleaned Of lmpurities Such As Water, Oil, Dirt,And Dust Before Use.lf Water ls Used ForCleaning, The Surface To Be Adhered Must Be Completely Dry Before Construction.

Transport and Storage:

During Storage Transportation ,products Of Different TypesAnd Specifications Should BeStacked Separately And Not Mixed Together ,they Should Be Stored Vertically ,with AHeight Not Exceeding Two Layers,Avoid Tilting OrLateral Pressure,And Avoid ExposureTo SunAnd Rain, If Necessary ,cover With Canvas And Ensure Adequate Ventilation.theStorage Temperature Should NotExceed 45℃。.under Normal Storage And TransportationConditions ,the Storage Period ln One Year.

Construction Method:

Lay The Polymer Waterproof Membrane According To The Marking Line ,take AnAppropriate Amount OfAdhesive Tape And Tear Off The lsolation Paper(film)on The Adhesive Tape.paste The Adhesive Tape Along The JointAnd Use ASmall Roller To PressThe Surface OfThe Adhesive Tape, Ensuring That The Adhesive Tape ls Fully Bonded ToThe Surface OfThe Substrate To Ensure A Tight Combination Of The Adhesive Tape AndThe Substrate Surface.

Product Specification